IBM 4230 User Guide - Page 15

Safety Information The construction of this machine provides extra protection against the risk of electric shock by grounding appropriate metal parts. The extra protection may not function unless the power cord is connected to a properly grounded outlet. This machine has a grounding-type (3-wire) power cord because grounding is necessary. It is the responsibility of the customer or the person installing the machine to connect it to a properly grounded outlet. Seek professional assistance before using an adapter or extension cord; such a device could interrupt the grounding circuit. If this machine is connected to an outlet that has been incorrectly connected to the building wiring, serious electric shock could result. For continued protection against the risk of electric shock and personal injury: Connect the machine only to a properly grounded outlet of the correct voltage. The voltage your machine will accept is indicated on the machine. Make sure the machine is turned Off (O) before you connect or disconnect the power cord or other cables. If the machine has cables other than the power cord, you must connect them before you plug the power cord into an outlet. You must first unplug the power cord from the outlet when you remove the other cables. Do not use the machine in an area where it can become wet. Keep hair and personal articles away from moving parts in the machine to avoid the possibility of getting them caught. Refer service or repairs to qualified personnel. There may be some increased risks of electric shock and personal injury during disassembly and servicing of this machine. Professional service personnel should understand this and take necessary precautions. © Copyright IBM Corp. 1991, 1994 xiii