IBM 4230 User Guide - Page 108
Removing the Dual Purpose Forms Device F2
View all IBM 4230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Removing the Dual Purpose Forms Device (F2) Note: If you are removing this forms device to install a different forms device, make sure you change the selected forms device in the Configuration Menu. To remove the F2 forms device, follow these steps: 1. If forms are in the printer, unload them (see "Unloading Forms" on page 1-84), then continue with Step 2 of this procedure. 2. Turn the power Off (O). 3. Open the access cover. Then open the front paper door as follows: a. Pull the door up until it will not go any higher. b. Push the door back slightly to lock it in the open position. Access Cover Paper Door 1-86 User's Guide
Removing the Dual Purpose Forms Device (F2)
Note:
If you are removing this forms device to install a different
forms device, make sure you change the selected forms device in
the Configuration Menu.
To remove the F2 forms device, follow these steps:
1. If forms are in the printer, unload them (see “Unloading Forms”
on page
1-84), then continue with Step 2 of this procedure.
2. Turn the power Off (O).
3. Open the access cover.
Then open the front paper door as
follows:
a. Pull the door up until it will not go any higher.
b. Push the door back slightly to lock it in the open position.
Access Cover
Paper Door
1-86
User’s Guide