IBM 4230 User Guide - Page 99

Adjusting the Top of Form Position The Micro ↑ and Micro ↓ keys control fine vertical movement. Each time you press these keys, the printer moves the form in 0.355 mm (0.014 in.) increments. Note: If you use the Micro ↑, Micro ↓, or Line Feed keys to adjust the print position, you may need to reprint the page. Open the access cover. Then open the front paper door as follows: 1. Pull the door up until it will not go any higher. 2. Push the door back slightly to lock it in the open position. Access C over Paper Door Next load forms, if necessary (see "Loading Forms in the F2 Forms Device" on page 1-60 for more information). Complete the following steps to make fine vertical adjustments to the top of form position. To set the top of form position, follow these steps: 1. Press Stop. The printer displays NOT READY Chapter 1. Setting Up the 4230 Printer 1-77