IBM 4230 User Guide - Page 68
Adjusting the Top of Form Position, Micro
View all IBM 4230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Adjusting the Top of Form Position The Micro ↑ and Micro ↓ keys control fine vertical movement. Each time you press these keys, the printer moves the form in 0.355 mm (0.014 in.) increments. Open the access cover. Then open the front paper door as follows: 1. Pull the door up until it will not go any higher. 2. Push the door back slightly to lock it in the open position. Access Cover Paper Door Next load forms, if necessary (see "Loading Forms in the F1 Forms Device" on page 1-26 for more information). Complete the following steps to make fine vertical adjustments to the top of form position. To set the top of form position, follow these steps: 1. Press Stop. The printer displays NOT READY 1-46 User's Guide
Adjusting the Top of Form Position
The
Micro
↑
and
Micro
↓
keys control fine vertical movement.
Each
time you press these keys, the printer moves the form in 0.355 mm
(0.014 in.) increments.
Open the access cover.
Then open the front paper door as follows:
1. Pull the door up until it will not go any higher.
2. Push the door back slightly to lock it in the open position.
Access Cover
Paper Door
Next load forms, if necessary (see “Loading Forms in the F1 Forms
Device” on page
1-26 for more information).
Complete the following
steps to make fine vertical adjustments to the top of form position.
To set the top of form position, follow these steps:
1. Press
Stop
.
The printer displays
NOT READY
<A>
1-46
User’s Guide