IBM 4230 User Guide - Page 25
access cover
View all IBM 4230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Note: The printer weighs approximately 20.4 kg (45 lb). Do not lift it by yourself. 2. Place the printer at the workstation (printer stand or table of your choice). Be sure that you have access to both the front and the rear of the printer. 3. Remove the protective film from the access cover window and discard it. 4. Remove the packaging material, if present, from under the acoustic door. 5. Open the access cover. Then open the front paper door as follows: a. Pull the door up until it will not go any higher. b. Push the door back slightly to lock it in the open position. Access C over Paper Door Chapter 1. Setting Up the 4230 Printer 1-3
Note:
The printer weighs approximately 20.4 kg (45 lb).
Do not
lift it by yourself.
2. Place the printer at the workstation (printer stand or table of your
choice).
Be sure that you have access to both the front and the
rear of the printer.
3. Remove the protective film from the access cover window and
discard it.
4. Remove the packaging material, if present, from under the
acoustic door.
5. Open the
access cover
.
Then open the front paper door as
follows:
a. Pull the door up until it will not go any higher.
b. Push the door back slightly to lock it in the open position.
Access
C
over
Paper
D
oor
Chapter 1.
Setting Up the 4230 Printer
1-3