IBM 4230 User Guide - Page 129
Adjusting the Top of Form Position, Micro, Line Feed, under, lower forms guide, Load/Eject
View all IBM 4230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Adjusting the Top of Form Position The Micro ↑ and Micro ↓ keys control fine vertical movement. Each time you press these keys, the printer moves the form in 0.355 mm (0.014 in.) increments. Note: If you use the Micro ↑, Micro ↓, or Line Feed keys to adjust the print position, you may need to reprint the page. To set the top of form position, follow these steps: 1. Carefully feed the form under the lower forms guide. Use the left edge of the lower forms guide to help feed the form in straight. Feed the form until the top edge touches both the left and right feed rollers. Continue to hold the form. Low er F o rm s G u id e 2. Press Load/Eject. As the printer begins to pull in the form, release the form. The form loads to the top of form position. 3. If the first print line is not where you want it to be, press Micro ↑, Micro ↓, or Line Feed until it reaches the desired line. Note: If you need to adjust the paper downward, adjust at least five steps beyond where you want the top of form position; then make your final adjustment in the up direction. You can also use the Top of Form Alignment Test (see "Top of Form Alignment" on page 5-4) to print a line of characters to determine more accurately where you have set the top of form position. Chapter 1. Setting Up the 4230 Printer 1-107