IBM 4230 User Guide - Page 234
Continuous Forms Device F1 and Dual Purpose Forms Device
View all IBM 4230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
2 FORMS JAMMED CLEAR JAM AND RELOAD FORMS Continuous Forms Device (F1) and Dual Purpose Forms Device (F2): 1. Press Stop. 2. Be sure that the forms device is correctly installed. 3. Clear the jam. 4. Be sure that nothing blocks the blue forms guide/forms sensor. 5. Reset the top of form position. (See Chapter 1, "Setting Up the 4230 Printer.") 6. Press Start. 7. Verify the printed output; if pages are damaged or data is lost, follow your local operating procedures. Note: If this error occurs during the power-on test: 1. Turn the power Off (O). 2. Clear the jam. 3. Wait for 10 seconds and turn the power On (|). 4. Make sure the Forms Device parameter value is correct. 3 FORMS EJECTED PRESS LOAD Dual Purpose Forms Device (F2): This is not an error condition. Press Load/Eject to position the form back to the top of form position and enable printing. Continuous Forms Device (F1), Document Insertion Device (F3), and Auto Sheet Feeder (F4): B-4 User's Guide