IBM 4840-544 Service Guide - Page 120

Full-size keyboard integration tray August 3, 2006 5. To remove the 4610 SureMark printer when installed on a full-size keyboard integration tray, perform the following steps: Note: See the 4610 SureMark Point-of-Sale Printers User's Guide for detailed information about printer switch settings and cabling. C B A Figure 70. Removing the 4610 printer from the full-size keyboard integration tray Table 9. 4610 SureMark printer on a full-size keyboard integration tray legend A Printer stand for the 4610 Models TF6 and TF7 printers B 4610 Models TF6 and TF7 printers (small footprint) C 4610 Models TG3, TG4 and TG5 printers a. Unplug the 4610 SureMark printer cable from the SurePOS 500 Models 5x3 and 544/564 rear connector panel, as show in Figure 40 on page 60. b. For the 4610 SureMark Models TG3, TG4 and TG5 printers C , lift the printer up and off the keyboard integration tray, as show in Figure 70. c. For the 4610 SureMark TF6 and TF7 printers B , lift the printer up and off plastic printer base A on the keyboard integration tray. d. Remove the plastic printer base A . e. To reinstall the 4610 printer, go to "4610 SureMark printer installation on a keyboard integration tray" on page 126. 6. To remove a SurePoint Solution (Machine Type: 4820, Models 4FT, 4FD, 2GN, 5GN, and 2GB) from a full-size keyboard integration tray (mounted on a countertop or a cash drawer) or on a compact keyboard integration tray mounted to a cash drawer perform the following steps. The following procedure shows the 4820 mounted to a full-size cash drawer: 94