IBM 4840-544 Service Guide - Page 223

August 3, 2006 Korea As this equipment has undergone EMC registration for business purpose, the seller and/or buyer is asked to be aware of this point and in case an incorrect sale or purchase has been made, it is asked that a change to household use be made. Electrostatic discharge (ESD) Attention: ESD damage can occur when there is a difference in charge between the part, the product, and the service person. No damage will occur if the service person and the part being installed are at the same charge level. ESD Damage Prevention Anytime a service action involves physical contact with logic cards, modules, back-panel pins, or other ESD sensitive (ESDS) parts, the service person must be connected to an ESD common ground point on the product through the ESD wrist strap and cord. The ESD ground clip can be attached to any frame ground, ground braid, green wire ground, or the round ground prong on the AC power plug. Coax or connector outside shells can also be used. Handling Removed Cards Logic cards removed from a product should be placed in ESD protective containers. No other object should be allowed inside the ESD container with the logic card. Attach tags or reports that must accompany the card to the outside of the container. Macrovision copy protection technology This product incorporates copy protection technology that is protected by U.S. and foreign patents, including patent numbers 5,315,448 and 6,836,549, and other intellectual property rights. The use of Macrovision's copy protection technology in the product must be authorized by Macrovision. Reverse engineering or disassembly is prohibited. Trademarks The following are trademarks of the IBM Corporation in the United States or other countries, or both. Table 39. Trademarks IBM PS/2 SureOne SurePOS the IBM logo SureMark SurePoint Tivoli Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation, in the United States, other countries, or both. Appendix E. Notices 197