IBM 4840-544 Service Guide - Page 61
Removing, replacing
View all IBM 4840-544 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
August 3, 2006 Removing and replacing v Do not touch solder joints, pins, or exposed printed circuitry. v Do not leave the device where others can handle and possibly damage the device. v While the device is still in its anti-static bag, touch it and your finger to an unpainted metal part of the system unit for at least 2 seconds. (This action removes static electricity from the package and from your body.) v Remove the device from its package and install it directly into your system, without putting it down. If it is necessary to put the device down, place it onto its static-protective bag. (If your device is an adapter, place it component side up.) Do not place the device onto the cover of the system or onto a metal table. v Take additional care when handling devices during cold weather because heating reduces indoor humidity and increases static electricity. Chapter 4. Removing and replacing FRUs for the SurePOS 500 Models 5x3 and 544/564 35