IBM 4840-544 Service Guide - Page 134

Cash drawer FRUs August 3, 2006 Compact cash drawer FRUs - removing and replacing This section describes how to remove and replace compact cash drawer-related FRUs. Removing and replacing a compact cash drawer To remove a compact cash drawer: 1. Disconnect the cash drawer cable. 2. Open the cash drawer and pull it all the way out. 3. Remove the till. 4. Facing the front of the drawer, use a coin or large screwdriver to move the drawer slide latches to the right until the drawer is released from the slide assembly (see Figure 83 and Figure 84). Lift the drawer out. 5. If you will be replacing the drawer, remove the lock assembly and install it in the new drawer (see "Removing and replacing the keylock assembly" on page 113). Figure 83. Releasing the drawer from the slide assembly Slide Latch Figure 84. Removing and replacing the compact cash drawer To replace the compact cash drawer, reverse this procedure. Removing and replacing the slide latches To remove the cash-drawer slide latches: 1. Disconnect the cash-drawer cable. 2. Remove the drawer (see "Removing and replacing a compact cash drawer"). 3. Remove the slide latch by sliding it all the way to the left (latched position). 108