Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 109

GS108T and GS110TP Smart Switch Software Administration Manual Click Refresh to update the information on the screen with the most current data. CST Configuration Use the Spanning Tree CST Configuration page to configure Common Spanning Tree (CST) and Internal Spanning Tree on the switch. To display the Spanning Tree CST Configuration page, click SwitchingSTPAdvanced  CST Configuration. Figure 3-17 To configure CST settings: 1. Specify values for CST in the appropriate fields: • Bridge Priority. When switches or bridges are running STP, each is assigned a priority. After exchanging BPDUs, the switch with the lowest priority value becomes the root bridge. Specifies the bridge priority value for the Common and Internal Spanning Tree (CST). The valid range is 0-61440. The bridge priority is a multiple of 4096. If you specify a priority that is not a multiple of 4096, the priority is automatically set to the next lowest priority that is a multiple of 4096. For example, if the priority is attempted to be set to any value between 0 and 4095, it will be set to 0. The default priority is 32768. Configuring Switching Information v1.0, April 2010 3-25