Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 204
Disable, Unknown Unicast, Do not use storm control.
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Figure 5-20 To configure storm control settings: 1. Select the check box next to the port to configure. Select multiple check boxes to apply the same setting to all selected ports. Select the check box in the heading row to apply the same settings to all ports. 2. From the Ingress Control Mode menu, select the mode of broadcast affected by storm control. • Disable. Do not use storm control. • Unknown Unicast. If the rate of unknown L2 unicast (destination lookup failure) traffic ingressing on an interface increases beyond the configured threshold, the traffic will be dropped. 5-36 v1.0, April 2010 Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual
5-36
Managing Device Security
v1.0, April 2010
To configure storm control settings:
1.
Select the check box next to the port to configure. Select multiple check boxes to apply the
same setting to all selected ports. Select the check box in the heading row to apply the same
settings to all ports.
2.
From the Ingress Control Mode menu, select the mode of broadcast affected by storm control.
•
Disable
. Do not use storm control.
•
Unknown Unicast
. If the rate of unknown L2 unicast (destination lookup failure) traffic
ingressing on an interface increases beyond the configured threshold, the traffic will be
dropped.
Figure
5-20