Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 44

GS108T and GS110TP Smart Switch Software Administration Manual To configure the time through SNTP: 1. From the Clock Source field, select SNTP. When the Clock Source is set to SNTP, the Date and Time fields are grayed out (disabled). The switch gets the date and time from the network. 2. Use the menu to select the Coordinated Universal Time (UTC) time zone in which the switch is located, expressed as the number of hours. The options in the Time Zone menu specify the time difference from UTC time zone. 3. Click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. 4. Use the SNTP Server Configuration page to configure the SNTP server settings, as described in "SNTP Server Configuration" on page 2-9. 5. Click Refresh to refresh the page with the most current data from the switch. 6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. The SNTP Global Status table on the Time Configuration page displays information about the system's SNTP client. The following table describes the SNTP Global Status fields. Table 2-2. SNTP Global Status Fields Field Version Supported Mode Last Update Time Last Attempt Time Description Specifies the SNTP Version the client supports. Specifies the SNTP modes the client supports. Multiple modes may be supported by a client. Specifies the local date and time (UTC) the SNTP client last updated the system clock. Specifies the local date and time (UTC) of the last SNTP request or receipt of an unsolicited message. 2-8 Configuring System Information v1.0, April 2010