Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 17
Switch Discovery in a Network with a DHCP Server, Start the Smart Control Center.
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Switch Discovery in a Network with a DHCP Server This section describes how to set up your switch in a network that has a DHCP server. The DHCP client on the switch is enabled by default. When you connect it to your network, the DHCP server will automatically assign an IP address to your switch. Use the Smart Control Center to discover the IP address automatically assigned to the switch. To install the switch in a network with a DHCP server, use the following steps: 1. Connect the switch to a network with a DHCP server. 2. Power on the switch by connecting its AC-DC power adapter. For the GS108T, you can also power on the switch by connecting Port 1 to a PoE Power Sourcing Equipment (PSE). 3. Install the Smart Control Center on your computer. 4. Start the Smart Control Center. 5. Click Discover for the Smart Control Center to find your switch. You should see a screen similar to the one shown in Figure 1-1. Figure 1-1 Getting Started 1-3 v1.0, April 2010