Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 124
IGMP Snooping Configuration
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
GS108T and GS110TP Smart Switch Software Administration Manual IGMP Snooping Configuration Use the IGMP Snooping Configuration page to configure the parameters for IGMP snooping, which is used to build forwarding lists for multicast traffic. To access the IGMP Snooping Configuration page, click Switching Multicast IGMP Snooping IGMP Snooping Configuration. Figure 3-27 To configure IGMP Snooping: 1. Enable or disable IGMP Snooping on the switch. • Enable. The switch snoops all IGMP packets it receives to determine which segments should receive packets directed to the group address. • Disable. The switch does not snoop IGMP packets. 2. Click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch 3-40 v1.0, April 2010 Configuring Switching Information