Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 148
Advanced, Interface Queue Configuration, PORTS, Queue ID, Minimum Bandwidth
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
GS108T and GS110TP Smart Switch Software Administration Manual To display the Interface Queue Configuration page, click the QoS CoS tab, and then click the Advanced Interface Queue Configuration link. Figure 4-3 To configure CoS queue settings for an interface: 1. To configure CoS queue settings for a physical port, click PORTS. 2. To configure CoS queue settings for a Link Aggregation Group (LAG), click LAGS. 3. To configure CoS queue settings for both physical ports and LAGs, click ALL. 4. Select the check box next to the port or LAG to configure. You can select multiple ports and LAGs to apply the same setting to the selected interfaces. Select the check box in the heading row to apply a trust mode or rate to all interfaces. 5. Configure any of the following settings: • Queue ID. Use the menu to select the queue to be configured. • Minimum Bandwidth. Enter a percentage of the maximum negotiated bandwidth for the selected queue on the interface. Specify a percentage from 0-100, in increments of 1. 4-6 Configuring Quality of Service v1.0, April 2010