Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 117

GS108T and GS110TP Smart Switch Software Administration Manual • VLAN ID. The menu contains all VLANs configured on the switch. Select a VLAN to associate with the MST instance. 2. To delete an MST instance, select the check box next to the instance and click Delete. 3. To modify an MST instance, select the check box next to the instance to configure, update the values, and click Apply. You can select multiple check boxes to apply the same setting to all selected ports. 4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. For each configured instance, the information described in the following table displays on the page. Table 3-5. Spanning Tree MST Status Field Description Bridge Identifier The bridge identifier for the selected MST instance. It is made up using the bridge priority and the base MAC address of the bridge. Time Since Topology Change Displays the total amount of time since the topology of the selected MST instance last changed. The time is displayed in hour/minute/second format, for example, 5 hours, 10 minutes, and 4 seconds. Topology Displays the total number of times topology has changed for the selected MST instance. Change Count Topology Change Indicates whether a topology change is in progress on any port assigned to the selected MST instance. The possible values are True or False. Designated Root Displays the bridge identifier of the root bridge, which is made up from the bridge priority and the base MAC address of the bridge. Root Path Cost Displays the path cost to the Designated Root for this MST instance. Root Port Indicates the port to access the Designated Root for this MST instance. Configuring Switching Information v1.0, April 2010 3-33