Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 21
Configuring the Network Settings on the Administrative System, system - default ip
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Configuring the Network Settings on the Administrative System If you choose not to use the Smart Control Center to configure the network information on the switch, you can connect directly to the switch from an administrative system, such as a PC or laptop computer. The IP address of the administrative system must be in the same subnet as the default IP address on the switch. For most networks, this means you must change the IP address of the administrative system to be on the same subnet as the default IP address of the switch (192.168.0.239). To change the IP address on an administrative system running a Microsoft® Windows® operating system, open the Internet Protocol (TCP/IP) properties screen that you access from the Local Area Connection properties, as shown in Figure 1-5. You need Windows Administrator privileges to change these settings. Figure 1-5 Getting Started 1-7 v1.0, April 2010