Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 90
LAG Name, Description, LAG ID, Link Trap, Admin Mode, STP Mode.
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Figure 3-3 To configure LAG settings: 1. Select the check box next to the LAG to configure. You can select multiple LAGs to apply the same setting to the selected interfaces. Select the check box in the heading row to apply the same settings to all interfaces. 2. Configure or view the following settings: • LAG Name. Specify the name you want assigned to the LAG. You may enter any string of up to 15 alphanumeric characters. A valid name has to be specified in order to create the LAG • Description. Specify the Description string to be attached to a LAG. It can be up to 64 characters in length. • LAG ID. Displays the number assigned to the LAG. This field is read-only. • Link Trap. Specify whether you want to have a trap sent when link status changes. The factory default is Disable, which will cause the trap to be sent. • Admin Mode. Select Enable or Disable from the menu. When the LAG (port channel) is disabled, no traffic will flow and LAGPDUs will be dropped, but the links that form the LAG (port channel) will not be released. The factory default is Enable. • STP Mode. Select the Spanning Tree Protocol Administrative Mode associated with the LAG. 3-6 Configuring Switching Information v1.0, April 2010