Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 26
Firmware Upgrade, Maintenance, Firmware, Download Firmware, Select new firmware, Apply, Tasks
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Note: Click the Tasks tab to view status information about the configuration download. Firmware Upgrade The application software for the GS108T and GS110TP Smart Switches is upgradeable, enabling your switch to take advantage of improvements and additional features as they become available. The upgrade procedure and the required equipment are described in this section. This procedure assumes that you have downloaded or otherwise obtained the firmware upgrade and that you have it available as a binary file on your computer. This procedure uses the TFTP protocol to implement the transfer from computer to switch. Note: You can also upgrade the firmware using the TFTP Download and HTTP Download features mentioned in this book. See "Download File To Switch" on page 7-5. To upgrade your firmware: 1. Click the Maintenance tab, and then click the Firmware link directly below the tabs (see Figure 1-1 on page 1-3). 2. Select the switch to upgrade and click Download Firmware. 3. From the Select new firmware window that appears, navigate to and select the firmware image to download to the switch. 4. Click Open. 5. Enter the switch password to continue downloading the firmware. 6. Click Apply to download the firmware and upgrade the switch with the new image. 1-12 v1.0, April 2010 Getting Started