Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 296
Configuration on VLAN Membership Configuration on, STP Switch
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 296 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Ports g1-g5 Connected to Hosts Ports g1-g5 Connected to Hosts Ports g6-g8 Connected to Switch 2 and 3 Switch 1 Root Bridge Ports g6-g8 Connected to Switch 1 and 3 Switch 2 Ports g6-g8 Connected to Switch 1 and 2 Ports g1-g5 Connected to Hosts Switch 3 Figure B-3 Perform the following procedures on each switch to configure MSTP: 1. Use the VLAN Configuration screen to create VLANs 300 and 500 (see "VLAN Configuration" on page 3-11). 2. Use the VLAN Membership screen to include ports g1-g8 as tagged (T) or untagged (U) members of VLAN 300 and VLAN 500 (see "VLAN Membership Configuration" on page 3-12). 3. From the STP Configuration screen, enable the Spanning Tree State option (see "STP Switch Configuration" on page 3-23). Use the default values for the rest of the STP configuration settings. By default, the STP Operation Mode is MSTP and the Configuration Name is the switch MAC address. 4. From the CST Configuration screen, set the Bridge Priority value for each of the three switches to force Switch 1 to be the root bridge: • Switch 1: 4096 • Switch 2: 12288 • Switch 3: 20480 B-18 v1.0, April 2010 Configuration Examples