Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 203
Storm Control, Refresh, Security, Traffic Control, Storm, Control
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
GS108T and GS110TP Smart Switch Software Administration Manual The following table describes the information displayed on the page: Table 5-5. MAC Filter Summary Fields Field Description MAC Address Identifies the MAC address that is filtered. VLAN ID The VLAN ID used with the MAC address to fully identify packets you want filtered. You can only change this field when you have selected the Create Filter option. Source Port Members Displays the ports included in the inbound filter. Destination Port Members Displays the ports included in the outbound filter. Click Refresh to update the page with the most current information. Storm Control A broadcast storm is the result of an excessive number of broadcast messages simultaneously transmitted across a network by a single port. Forwarded message responses can overload network resources and/or cause the network to time out. The switch measures the incoming broadcast/multicast/unknown unicast packet rate per port and discards packets when the rate exceeds the defined value. Storm control is enabled per interface, by defining the packet type and the rate at which the packets are transmitted. To display the Storm Control page, click Security Traffic Control, and then click the Storm Control link. Managing Device Security v1.0, April 2010 5-35