Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 53

GS108T and GS110TP Smart Switch Software Administration Manual 2. Specify the IP address in standard IPv4 dot notation to associate with the hostname. 3. Click Add. The entry appears in the list below. 4. To remove an entry from the static DNS table, select the check box next to the entry and click Delete. 5. To change the hostname or IP address in an entry, select the check box next to the entry and enter the new information in the appropriate field, and then click Apply. 6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. The Dynamic Host Configuration table shows host name-to-IP address entries that the switch has learned. The following table describes the dynamic host fields: Table 2-4. Dynamic Host Status Fields Field Description Host Total Lists the host name you assign to the specified IP address. Amount of time since the dynamic entry was first added to the table. Elapsed Type Amount of time since the dynamic entry was last updated. The type of the dynamic entry. Addresses Lists the IP address associated with the host name. Click Refresh to refresh the table with the most current data from the switch. Click Clear to delete Dynamic Host Entries. The table will be repopulated with entries as they are learned. Green Ethernet Configuration Use this page to configure Green Ethernet features. Using the Green Ethernet features allows for power consumption savings. To access this page, click System  Management  Green Ethernet Configuration. Configuring System Information v1.0, April 2010 2-17