Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 65
SNMP v3 User Configuration, Authentication, Link Up/Down, Spanning Tree, Apply, Cancel, System
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Figure 2-16 To configure the trap flags: 1. From the Authentication field, enable or disable activation of authentication failure traps by selecting the corresponding button. The factory default is Enable. 2. From the Link Up/Down field, enable or disable activation of link status traps by selecting the corresponding button. The factory default is Enable. 3. From the Spanning Tree field, enable or disable activation of spanning tree traps by selecting the corresponding button. The factory default is Enable. 4. If you make any changes to this page, click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. 5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. SNMP v3 User Configuration This is the configuration for SNMP v3. To access this page, click System SNMP SNMP V3 User Configuration. Configuring System Information v1.0, April 2010 2-29