Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 46
Server Type, Address, Priority, Version, Delete, Enter the protocol version number. The range is 1-4.
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Figure 2-4 To configure a new SNTP Server: 1. Enter the appropriate SNTP server information in the available fields: • Server Type. Specifies whether the address for the SNTP server is an IP address (IPv4) or hostname (DNS). • Address. Enter the IP address or the hostname of the SNTP server. • Port. Enter a port number on the SNTP server to which SNTP requests are sent. The valid range is 1-65535. The default is 123. • Priority . Specifies the priority of this server entry in determining the sequence of servers to which SNTP requests are sent. Enter a priority from 1-3, with 1 being the default and the highest priority. Servers with lowest numbers have priority. • Version. Enter the protocol version number. The range is 1-4. 2. Click Add. 3. Repeat the previous steps to add additional SNTP servers. You can configure up to three SNTP servers. 4. To removing an SNTP server, select the check box next to the configured server to remove, and then click Delete. The entry is removed, and the device is updated. 2-10 v1.0, April 2010 Configuring System Information