Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 54

GS108T and GS110TP Smart Switch Software Administration Manual Figure 2-9 To configure the Green Ethernet feature: 1. Enable or disable the Short Cable Mode. • Enable. The switch performs a cable test on each cable connect to its ports. If the cable is less than 10m in length, the port is placed in low power mode (nominal power). • Disable. Full transmit power is provided to all ports, regardless of cable length. 2. Click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. PoE (GS110TP Only) Ports g1-g8 on the GS110TP are IEEE802.3af-compliant ports. Each port is capable of delivering up to 15.4W of reliable, uninterrupted power to connected PoE-powered devices (PD). The GS110TP can provide a total of 46W of power to all connected devices. You can configure perport priority settings, timers, and power limits to manage the power supplied to the connected PDs and to ensure that the GS110TP power budget is used effectively. From the PoE link under the System tab, you can view and configure PoE settings for the switch and for ports g1-g8. From the PoE link, you can access the following pages: • "PoE Configuration" on page 2-19 • "PoE Port Configuration" on page 2-20 2-18 v1.0, April 2010 Configuring System Information