Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 180
TACACS, Priority, Key String, Connection Timeout, Apply, Server, Delete, Server Address
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Note: The Add option is available if fewer than five TACACS+ servers are configured on the system, and the Server Address field is only available when Add is selected in the TACACS+ Server IP Address field. After you add one or more TACACS+ servers, additional fields appear on the TACACS+ Server Configuration page. Figure 5-7 2. In the Priority field, specify the order in which the TACACS+ servers are used. A value of 0 is the highest priority. 3. In the Port field, specify the authentication port number through which the TACACS+ session occurs. The default is port 49, and the range is 0-65535. 4. In the Key String field, specify the authentication and encryption key for TACACS+ communications between the GS108T or GS110TP and the TACACS+ server. This key must match the encryption used on the TACACS+ server. The valid range is 0-128 characters. 5. In the Connection Timeout field, specify the amount of time that passes before the connection between the device and the TACACS+ server times out. The field range is from 1 to 30 seconds. 6. If you make changes to the page, or add a new entry, click Apply to apply the changes to the system. 7. To delete a configured TACACS+ server, select the IP address of the server from the TACACS+ Server drop down menu, and then click Delete. 5-12 v1.0, April 2010 Managing Device Security