Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 197
Backend State, EAPOL Flood Mode, Apply, Initialize, Reauthenticate, Cancel
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
GS108T and GS110TP Smart Switch Software Administration Manual • Aborting • Held • ForceAuthorized • ForceUnauthorized • Backend State. This field displays the current state of the backend authentication state machine. Possible values are as follows: • Request • Response • Success • Fail • Timeout • Initialize • Idle • EAPOL Flood Mode. This field is used to enable or disable the EAPOL Flood mode per Interface.The default value is Disable. 3. Click Apply to send the updated screen to the switch and cause the changes to occur on the switch and the changes will be saved. 4. Click Initialize to begin the initialization sequence on the selected port(s). This button is only selectable if the control mode is auto. If the button is not selectable, it will be grayed out. When this button is clicked, the action is immediate. It is not required to click Apply for the action to occur. 5. Click Reauthenticate to begin the reauthentication sequence on the selected port. This button is only selectable if the control mode is auto. If the button is not selectable, it will be grayed out. When this button is pressed, the action is immediate. It is not required to click Apply for the action to occur. 6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. Managing Device Security v1.0, April 2010 5-29