Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 179
TACACS+ Server Configuration,
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
GS108T and GS110TP Smart Switch Software Administration Manual To configure global TACACS+ settings: 1. In the Key String field, specify the authentication and encryption key for TACACS+ communications between the GS108T or GS110TP and the TACACS+ server. The valid range is 0-128 characters. The key must match the key configured on the TACACS+ server. 2. In the Connection Timeout field, specify the maximum number of seconds allowed to establish a TCP connection between the GS108T or GS110TP and the TACACS+ server. The valid range is 1-30 seconds. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 4. If you make any changes to the page, click Apply to apply the new settings to the system. TACACS+ Server Configuration Use the TACACS+ Server Configuration page to configure up to five TACACS+ servers with which the switch can communicate. To display the TACACS+ Server Configuration page, click Security Management Security, and then click the TACACS+ Server Configuration link. Figure 5-6 To configure TACACS+ server settings: 1. To add a new TACACS+ server, select Add from the TACACS+ Server field, enter the IP address of the server to add, and click Apply. Managing Device Security v1.0, April 2010 5-11