Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 91
LAG Membership, LAG Type, Active Ports, LAG State, Cancel, Apply, Switching, Basic, LAG ID
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
GS108T and GS110TP Smart Switch Software Administration Manual • LAG Type. Select Static or LACP. When the LAG is static, it does not transmit or process received LAGPDUs, for example the member ports do not transmit LAGPDUs and all the LAGPDUs it may receive are dropped. The default is Static. • Active Ports. A listing of the ports that are actively participating members of this Port Channel. A maximum of 4 ports can be assigned to a port channel. • LAG State. Indicates whether the link is Up or Down. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 4. If you make any changes to this page, click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. LAG Membership Use the LAG Membership page to select two or more full-duplex Ethernet links to be aggregated together to form a link aggregation group (LAG), which is also known as a port-channel. The switch can treat the port-channel as if it were a single link. To access the LAG Membership page, click Switching LAG Basic LAG Membership. Figure 3-4 To create a LAG: 1. From the LAG ID field, select the LAG to configure. Configuring Switching Information 3-7 v1.0, April 2010