Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 173

GS108T and GS110TP Smart Switch Software Administration Manual RADIUS Server Configuration Use the RADIUS Server Configuration page to view and configure various settings for the current RADIUS server configured on the system. To access the RADIUS Server Configuration page, click Security  Management Security, and then click the RADIUS  Server Configuration link. Figure 5-3 To configure a RADIUS server: 1. To add a RADIUS server, specify the settings the following list describes, and click Add. • In the Server Address field, specify the IP address of the RADIUS server to add. • In the Authentication Port field, specify the UDP port number the server uses to verify the RADIUS server authentication. The valid range is 0-65535. • From the Secret Configured menu, select Yes to add a RADIUS secret in the next field. You must select Yes before you can configure the RADIUS secret. After you add the RADIUS server, this field indicates whether the shared secret for this server has been configured. • In the Secret field, type the shared secret text string used for authenticating and encrypting all RADIUS communications between the switch and the RADIUS server. This secret must match the RADIUS encryption. • From the Active menu, specify whether the server is a Primary or Secondary server. • From the Message Authenticator menu, enable or disable the message authenticator attribute for the selected server. Managing Device Security 5-5 v1.0, April 2010