Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 62
Management Station IP, Community String, Access Mode
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Figure 2-14 To configure SNMP communities: 1. To add a new SNMP community, enter community information in the available fields described below, and then click Add. • Management Station IP. Specify the IP address of the management station.Together, the Management Station IP and the Management Station IP Mask denote a range of IP addresses from which SNMP clients may use that community to access this device. If either (Management Station IP or Management Station IP Mask) value is 0.0.0.0, access is allowed from any IP address. Otherwise, every client's address is ANDed with the mask, as is the Management Station IP Address; and, if the values are equal, access is allowed. For example, if the Management Station IP and Management Station IP Mask parameters are 192.168.1.0/255.255.255.0, then any client whose address is 192.168.1.0 through 192.168.1.255 (inclusive) will be allowed access. To allow access from only one station, use a Management Station IP Mask value of 255.255.255.255, and use that machine's IP address for Client Address. • Management Station IP Mask. Specify the subnet mask to associate with the management station IP address. • Community String. Specify a community name. A valid entry is a case-sensitive string of up to 16 characters. • Access Mode. Specify the access level for this community by selecting Read/Write or Read Only from the menu. 2-26 v1.0, April 2010 Configuring System Information