Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 35

GS108T and GS110TP Smart Switch Software Administration Manual 3. To enable encryption, select the DES option in the Encryption Protocol field. Then, enter an encryption code of eight or more alphanumeric characters in the Encryption Key field. 4. Click Apply. To access configuration information for SNMPv1 or SNMPv2, click System  SNMP  SNMPv1/v2 and click the page that contains the information to configure. Interface Naming Convention The GS108T and GS110TP support physical and logical interfaces. Interfaces are identified by their type and the interface number. The physical ports are gigabit interfaces and are numbered on the front panel. You configure the logical interfaces by using the software. Table 1-2 describes the naming convention for all interfaces available on the switch. Table 1-2. Types of Interface Interface Physical Link Aggregation Group (LAG) CPU Management Interface Description Example The physical ports are gigabit Ethernet interfaces and are numbered sequentially starting from one. g1, g2, g3 LAG interfaces are logical interfaces that are only used for bridging functions. l1, l2, l3 LAG1, LAG2 This is the internal switch interface responsible c1 for the switch base MAC address. This interface is not configurable and is always listed in the MAC Address Table. Getting Started v1.0, April 2010 1-21