Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 248
Messages Relayed, g host. Messages forwarded to multiple hosts are counted once for each host.
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
GS108T and GS110TP Smart Switch Software Administration Manual The Server Log Configuration area also displays the following information: • The Messages Relayed field shows the number of messages forwarded by the syslog function to a syslog host. Messages forwarded to multiple hosts are counted once for each host. • The Messages Ignored field shows the number of messages that were ignored. To configure a remote log server 1. To add a remote syslog host (log server), specify the settings in the following list and click Add. • Host Address. Specify the IP address or hostname of the host configured for syslog. • Port. Specify the port on the host to which syslog messages are sent. The default port is 514. • Severity Filter. Use the menu to select the severity of the logs to send to the logging host. Logs with the selected severity level and all logs of greater severity are sent to the host. For example, if you select Error, the logged messages include Error, Critical, Alert, and Emergency. The default severity level is Alert(1). The severity can be one of the following levels: • Emergency (0): The highest level warning level. If the device is down or not functioning properly, an emergency log is saved to the device. • Alert (1): The second highest warning level. An alert log is saved if there is a serious device malfunction, such as all device features being down. • Critical (2): The third highest warning level. A critical log is saved if a critical device malfunction occurs, for example, two device ports are not functioning, while the rest of the device ports remain functional. • Error (3): A device error has occurred, such as if a port is offline. • Warning (4): The lowest level of a device warning. • Notice (5): Provides the network administrators with device information. • Informational (6): Provides device information. • Debug (7): Provides detailed information about the log. Debugging should only be entered by qualified support personnel. 2. To delete an existing host, select the check box next to the host and click Delete. 3. To modify the settings for an existing host, select the check box next to the host, change the desired information, and click Apply. 6-20 v1.0, April 2010 Monitoring the System