Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 29
Understanding the User Interfaces, Using the Web Interface
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
GS108T and GS110TP Smart Switch Software Administration Manual Understanding the User Interfaces GS108T and GS110TP software includes a set of comprehensive management functions for configuring and monitoring the system by using one of the following methods: • Web user interface • Simple Network Management Protocol (SNMP) Each of the standards-based management methods allows you to configure and monitor the components of the GS108T and GS110TP software. The method you use to manage the system depends on your network size and requirements, and on your preference. The GS108T and GS110TP Smart Switch Software Administration Manual describes how to use the Web-based interface to manage and monitor the system. Using the Web Interface To access the switch by using a Web browser, the browser must meet the following software requirements: • HTML version 4.0, or later • HTTP version 1.1, or later • Java Runtime Environment 1.6 or later Use the following procedures to log on to the Web interface: 1. Open a Web browser and enter the IP address of the switch in the Web browser address field. 2. The factory default password is password. Type the password into the field on the login screen, as shown in Figure 1-6 on page 1-9, and then click Login. Passwords are case sensitive. 3. After the system authenticates you, the System Information page displays. Getting Started v1.0, April 2010 1-15