Netgear GS110TP GS108Tv2/GS110TP Software Reference Manual - Page 245
FLASH Log Configuration, Monitoring, FLASH Log
UPC - 606449069129
View all Netgear GS110TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 245 highlights
GS108T and GS110TP Smart Switch Software Administration Manual FLASH Log Configuration The FLASH log is a log that is stored in persistent storage, which means that the log messages are retained across a switch reboot. • The first log type is the system startup log. The system startup log stores the first N messages received after system reboot. This log always has the log full operation attribute set to stop on full and can store up to 32 messages. • The second log type is the system operation log. The system operation log stores the last N messages received during system operation. This log always has the log full operation attribute set to overwrite. This log can store up to 1000 messages. Either the system startup log or the system operation log stores a message received by the log subsystem that meets the storage criteria, but not both. On system startup, if the startup log is configured, it stores messages up to its limit. The operation log, if configured, then begins to store the messages. Use the FLASH Log Configuration page to enable or disable persistent logging and to set the severity filter. To access the FLASH Log Configuration page, click the Monitoring Logs tab, and then click the FLASH Log link. Figure 6-6 Monitoring the System v1.0, April 2010 6-17