Nokia 9290 Nokia 9290 Communicator User Guide - Page 250

Extras 232 Tip: Changing the PIN code requires that PIN code request is selected, the phone is on, and that there is a valid SIM card inserted. Tip: Changing the restriction password requires that the phone is on and the Call restriction service is activated for your SIM card. PIN code: This setting allows you to change the PIN code. The new PIN code must be from 4 to 8 digits long. PIN2 code: This setting allows you to change the PIN2 code. The PIN2 code is required to access some functions, such as the call cost settings, which must be supported by your SIM card. If you enter an incorrect PIN2 code three times in succession, you will need a PUK2 code to unblock the PIN2 code. The new PIN2 code must be from 4 to 8 digits long. Lock code: This setting allows you to change the lock code. The default lock code is 12345. The new lock code must be from 5 to 10 digits long. If you enter an incorrect lock code five times in succession, the phone will be locked for five minutes after which you can try again. If you try again within less than five minutes, you have to wait five minutes more before a code can be accepted. Restriction password: This setting allows you to change the restriction password. If you enter an incorrect password three times in succession, the password is blocked and you must ask the system service provider for a new password. Note: Avoid using codes that are similar to emergency numbers to prevent accidental dialing of the emergency number. Note: Even when the communicator is locked, it is possible to call to the emergency number preprogramed into the phone (for example, 911 or other official emergency number).