Nokia 9290 Nokia 9290 Communicator User Guide - Page 294

Troubleshooting 276 15 Fax modem problems When you use the communicator as a fax modem, make sure that the communicator and the PC use the same baud rate. If you use the infrared connection, the baud rate is set automatically. If you use the cable connection, set the baud rate in the Fax modem settings. For the PC, the baud rate is set in the connectivity software of the PC. If you use the cable connection, fully compatible operation with all PC fax and terminal software cannot be guaranteed. Consult your dealer. If you have problems with your PC fax software, use the infrared connection. If you have problems establishing a data connection with the remote modem, try fixing the data transmission rate by using an AT command. Common AT commands based on the GSM 07.07 standard and supported by the Nokia 9290 Communicator and are listed in the CD-ROM supplied with your communicator. You can find this file in the documentation section of the CD-ROM. For information on how to use the AT commands and fax modem drivers, consult the documentation of the telecommunication or fax application that you use on your PC. 16 Access code problems The default lock code for Nokia 9290 Communicator is 12345. If you forget or lose the lock code contact your communicator dealer. If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your system service provider. For information about Internet passwords, contact your Internet service provider.