Nokia 9290 Nokia 9290 Communicator User Guide - Page 268

Extras 250 Note: You cannot change fax modem settings if the fax modem is activated. To change these settings, make sure that fax modem is not active. Open Fax modem and press Settings. A dialog with two pages opens. Define the following: Connection page Connection type - Press Change to change this option. The options are Infrared and Cable. If you select Infrared, the rest of the options are automatically set. If you select Cable, also define the following: Transfer rate - The speed with which the data is transferred between your communicator and PC. The best transfer rate for normal GSM calls is 19200. For high speed calls, you should select 115200. Select the same rate in your PC application as well. Data bits - Defines how many bits are used to form a byte. The default option, 8, can typically be used. Parity - A parity error-checking procedure. The default option, None, can typically be used. Stop bits - Defines number of stop bits used. The default option, 1, can typically be used. Flow control - It is recommended to select Software. This setting needs to be the same in you PC as well.