Nokia 9290 Nokia 9290 Communicator User Guide - Page 86
Forwarding Menu 4
View all Nokia 9290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Phone 68 IMPORTANT: The default lock code is 12345. For security reasons, it is imperative that you change the lock code. Keep the code secret and in a safe place, separate from the communicator. For information on changing the lock code, see section 'Security' on page 230. Restore factory settings (3-4) You can reset some of the menu settings to their original values. You need the lock code for this function. This function will not affect stored phone numbers and names, access codes, earpiece volume setting, call timers, cost counters, selected application tones or SMS messages. Tip: The icon is shown in the stand-by mode when you have activated the Forward all voice calls. Forwarding (Menu 4) This system service allows you to direct your incoming voice calls to another phone number when you do not want to be disturbed, or when the phone is switched off or outside the system coverage area. For details, see 'Forward voice calls' on page 105. The options are: Forward all voice calls/Forward if busy/Forward if not answered/Forward if out of reach/Forward if not available/Forward all fax calls/Forward all data calls/Cancel all forwards. Select Activate to set the forward setting on if allowed by the system, Cancel to set the setting off. Select Check status to check whether the forward is activated or not. If you select Forward if not answered or Forward if not available, you can also select Set delay to choose a delay time before the call is forwarded. The options are 5 sec/ 10 sec/15 sec/20 sec/25 sec/30 sec.