Samsung SCH-U960 User Manual (user Manual) (ver.f8) (English) - Page 116

"PHONE ONLY CODE SET" or "CALLS & SERVICES CODE SET" message appears in the display confirming that your lock code was changed. Note: Your Rogue™ does not allow you to view the lock code for security reasons. If you change the lock code, record the new code. Restrictions 1. From the Home screen, touch MENU ➔ Settings & Tools ➔ 7. Phone Settings. 2. Touch 7. Security. You're prompted to enter the lock code. The default lock code is the last four digits of your telephone number. 3. Enter the Lock Code. Several security menus appear in the display. 4. Touch 2. Restrictions. 5. Enter the Calls and Services Code. The default calls and services code is the last four digits of your telephone number. The following options display: • Location Setting: Options are Lock Setting and Unlock Setting. 113 • Calls: Options are Incoming Calls and Outgoing Calls. • Messages: Options are Incoming Messages and Outgoing Messages. • Dial-Up Modem: Options are Allow All and Block All. 6. Touch to make your selection. Phone Lock Setting Phone Lock Setting restricts the use of your Rogue™ with the exception of emergency outgoing calls to 911. You have to unlock the Rogue™ to place or receive a call. 1. From the Home screen, touch MENU ➔ Settings & Tools ➔ 7. Phone Settings. 2. Touch 7. Security. You're prompted to enter the lock code. The default lock code is the last four digits of your telephone number. 3. Enter the Lock Code. The security menu appears in the display. 4. Touch 3. Phone Lock Setting. The following options display: • Unlocked: If locked, unlocks the device or phone, depending on your selection. • On Power Up: The Lock Code is required whenever you power up the phone.