Yamaha M7CL M7cl V1 Owner's Manual - Page 100
Inserting an external device into a channel
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Inserting an external device into a channel Inserting an external device into a channel If desired, you can insert an effect processor or other external device into the signal path of an INPUT, MIX, MATRIX, STEREO, or MONO channel. When doing so, the type of input/output port used for the insertion and the location of the insertion in/out can be specified individually for each channel. 1 As desired, connect your external equipment to the I/O card(s) in slots 1-3. DIGITAL OUT DIGITAL IN digital I/O card DIGITAL OUT DIGITAL IN effect processor M7CL HINT • If you install a digital I/O card in a slot and digitally connect an external device, you'll need to synchronize the word clock between the M7CL and your external device (→ p. 208). B INSERT field Here you can make insert-related settings. Press either the left or right field to choose PRE EQ (before the attenuator) or PRE FADER (before the fader) as the insert-out/in position. C INSERT OUT popup button This indicates the output port that is selected as the insert-out for this channel. Press this button to open a popup window where you can select the output port. D INSERT IN popup button This indicates the input port that is selected as the insert-in for this channel. Press this button to open a popup window where you can select the input port. E INSERT ON/OFF button This button switches the insert on/off. If this button is off, the insert-signal path is bypassed. [INSERT/DIRECT OUT popup window (8ch)] 2 Use the navigation keys to access the OVERVIEW screen for the channel to which you want to assign an input source. 3 Press the INSERT/DIRECT OUT field to access the INSERT/DIRECT OUT popup window. In the INSERT/DIRECT OUT popup window you can view or change the type of input/output port used for insertion and the location at which insertion will occur. There are two variations of this popup window; one-channel and eight channel. These windows include the following items. [INSERT/DIRECT OUT popup window (1ch)] 1 2 34 5 1 Icon / Channel number / Channel name This indicates the icon selected for that channel, the channel number, and the channel name. 1 2 3 4 5 1 Channel number / Icon This shows the channel number and the icon that is selected for that channel. You can press this field to change the selected channel. B Channel name This indicates the name assigned to that channel. C INSERT OUT popup button This indicates the output port that is selected as the insert-out for this channel. Press this button to open a popup window where you can select the output port. The currently specified insert-out/in position is shown below the button. D INSERT ON/OFF button This button switches the insert on/off. If this button is off, the insert-out/in signal path is bypassed. E INSERT IN popup button This indicates the input port that is selected as the insert-in for this channel. Press this button to open a popup window where you can select the input port. 100 M7CL Owner's Manual