Yamaha M7CL M7cl V1 Owner's Manual - Page 184
Using program changes to recall scenes and library items, MIDI SETUP and select the port
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Basic MIDI settings • Using program changes to recall scenes and library items 1 CH field Select CH 1-CH 16 as the channel that will be used to transmit or receive MIDI messages. 7 Select the channel. Use the ↑/↓ buttons to select an item. Press the OK button to confirm the selected channel and close the MIDI SETUP popup window. HINT • Alternatively, you can select the channel by pressing the desired channel in the field or by turning one of the multifunction encoders. • When transmitting or received parameter changes, the channel number you specify here is used as the device number (a number that identifies the transmitting or receiving unit). 8 Turn transmission/reception on or off for each MIDI message. HINT • For details on using program changes, refer to "Using program changes to recall scenes and library items," below. • For details on using control changes, refer to "Using control changes to control parameters" (→ p. 187). Using program changes to recall scenes and library items The M7CL lets you assign a specific event (scene recall or effect library recall) to each program change number, so that when this event is executed on the M7CL, a program change message of the corresponding number will be transmitted to an external device. Conversely, the corresponding event can be executed when a program change message is received from an external device. 1 Connect the M7CL to your external device. The following illustration shows an example of using the MIDI IN/OUT connectors to transmit and receive MIDI messages. MIDI IN MIDI OUT MIDI IN MIDI OUT external device M7CL 2 In the function access area, press the SETUP button to access the SETUP screen. MIDI button 3 In the center of the screen, press the MIDI button to access the MIDI popup window. 4 Press the MIDI SETUP tab to access the MIDI SETUP page, and select the port and MIDI channel on which program changes will be transmitted and received, as described in "Basic MIDI settings" (→ p. 182). 5 Press the PROGRAM CHANGE tab to access the PROGRAM CHANGE page. In the PROGRAM CHANGE page you can specify how program changes will be transmitted and received, and choose the event (scene recall or effect library recall) that will be assigned to each program number. This page includes the following items. 1 2 3 4 6 5 184 M7CL Owner's Manual