Yamaha M7CL M7cl V1 Owner's Manual - Page 253

Functions that can be assigned to user-defined keys Functions that can be assigned to user-defined keys FUNCTION NO ASSIGN SCENE TALKBACK OSCILLATOR CUE CLEAR MONITOR EFFECT BYPASS TAP TEMPO MUTE MASTER METER BRIGHTNESS PAGE CHANGE CH SELECT SEND ENCODER SET BY SEL SET DEFAULT VALUE SET NOMINAL LEVEL SENDS ON FADER PARAMETER 1 - INC RECALL DEC RECALL DIRECT RECALL RECALL UNDO STORE UNDO TALKBACK ON PARAMETER 2 - - - SCENE #000-#300 - - LATCH UNLATCH SELECTED CH ASSIGN - OSCILLATOR ON - SELECTED CH ASSIGN - - - MONITOR ON - SELECTED CH ASSIGN - SOURCE SELECT DIMMER ON MONO MONITOR RACK 5-8 CURRENT PAGE RACK 5-8 MUTE GROUP 1-8 PEAK HOLD ON BANK CHANGE STEREO L/R, MONO(C), LCR, STIN1-4, DEFINE PAGE BOOKMARK - CLOSE POPUP - INC, DEC - TO MIX/TO MATRIX - SET [+48V] - SET [Ø] - SET [PRE SEND] - SET [TO STEREO] - SET [TO MONO] - SET [TO LCR] - - - - - MIX1-16 - Explanation No assignment. Recall the scene of the next existing number. Recall the scene of the previous existing number. Directly recall the scene of the specified number. Execute RECALL UNDO. Execute STORE UNDO. Switch TALKBACK on/off. Turn TALKBACK on while pressed. While holding down this key, press a SEL key of an OUTPUT channel to switch the assignment on/off. During this time, the [SEL] LED will be lit if assign is ON, or dark if OFF. Switch the OSC on/off. The OSC popup window will appear when this is turned on. While holding down this key, press a SEL key of an OUTPUT channel to switch the assignment on/off. During this time, the [SEL] LED will be lit if assign is ON, or dark if OFF. Clear all CUE settings together. Switch MONITOR on/off. While holding down this key, press the SEL key of a MIX or MATRIX channel to switch the assignment on/off. During this time, the [SEL] LED will be lit if assign is ON, or dark if OFF. Recall the selected signal to the monitor. Switch the monitor dimmer function on/off. Switch MONO MONITOR on/off. Bypass the specified effect. Use the tap tempo function in the displayed screen. Use the tap tempo function for the specified effect. Switch MUTE GROUP MASTER on/off. Turn the meter PEAK HOLD function on/off. Toggle between the brightness settings stored in A and B. Memorize the currently selected screen (hold down the key for two seconds or longer), or display the last-memorized screen (press and release the key within two seconds). Popup screens can also be memorized. In the case of a rack, the number of that rack is also memorized. Close the displayed popup window. Decrement the channel selection. If INPUT or ST IN is selected, swich the function of the Selected Channel section's send encoders from TO MIX/TO MATRIX. Hold down this key and press SEL to switch it on/off. During this time, the [SEL] LED will be lit if on or dark if off. While holding down this key, push an encoder of the Selected Channel or Centralogic section to reset it to the default value. While holding down this key, press a [SEL] key to set the fader of that channel to nominal level. Recall the Sends On Fader function to the selected MIX. Appendices M7CL Owner's Manual 253