Yamaha M7CL M7cl V1 Owner's Manual - Page 48
In The Stereo/mono Master To Stereo/mono field
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Setting up to use the M7CL 5 In the STEREO/MONO MASTER section, make sure that the [ON] key of the STEREO channel is on, and raise the STEREO channel fader to 0 dB. 1 2 1 STEREO channel [ON] key B STEREO channel fader 6 Raise the fader of the currently selected input channel to an appropriate volume. In this state, you should now hear sound from the speaker system that is patched to the STEREO channel. If you don't hear sound, check whether the LR meters are moving in the METER field of the function access area. HINT • The signal being output from the STEREO channel can also be monitored using headphones connected to the PHONES OUT jack located below the front pad (→ p. 142). 7 To adjust the pan/balance of the signal sent from the input channel to the STEREO bus, turn the [PAN] encoder of the SELECTED CHANNEL section. When you turn the [PAN] encoder, the knob in the HA field of the SELECTED CHANNEL VIEW screen will move in tandem with the encoder. 8 Press the [SEL] key of another input channel, and adjust the pan/balance in the same way. When you press a [SEL] key to select another channel, the channel shown in the SELECTED CHANNEL VIEW screen will change accordingly. ● Using the Centralogic section (settings for eight channels) Here's how to use the Centralogic section and OVERVIEW screen to adjust the input level and pan/balance sent to the STEREO bus for up to eight signals at a time. 1 Press a navigation key in the NAVIGATION KEYS section so that the input channels you want to control are assigned to the Centralogic section. The selected eight channels are shown in the OVERVIEW screen. [METER field of the function access area] ● If the LR meters are moving It may be that the STEREO channel is not correctly patched to the output jacks that are connected to your speaker system. Check the output port patching (→ p. 95). ● If the LR meters are not moving It may be that the INPUT channel [ON] key is off. Check the status of the [ON] key (→ p. 16). 48 M7CL Owner's Manual 1 1 TO STEREO/MONO field 2 Make sure that in the TO STEREO/MONO field of the screen, the ST symbol of each channel is on (white characters on pink background). The ST/MONO symbol in the OVERVIEW screen indicates the on/off status of the signal sent from that input channel to the STEREO/MONO buses. If the ST symbol is off (gray characters on a black background), use the TO ST PAN/BALANCE field of the SELECTED CHANNEL VIEW page to switch it on (→ p. 47).
![](/manual_guide/products/yamaha-m7cl-m7cl-v1-owners-manual-022fa08/48.png)