Home » Yamaha Manuals » Audio Mixers » Yamaha M7CL » Manual Viewer

Yamaha M7CL M7cl V1 Owner's Manual - Page 97

To assign a channel to an output port, put port you want to control.

Get Yamaha M7CL PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

Changing the output patch settings • FEET (1127.26ft/s) ...........The delay time is shown as a distance in feet, calculated as the speed of sound (1127.26 feet/s) at an air temperature of 20 °C (68 °F) multiplied by the delay time (seconds). • SAMPLE .........The delay time is shown as a number of samples. If you change the sampling frequency at which the M7CL operates, the number of samples will change accordingly. • msec ...........The delay time is shown in units of milliseconds. If this button is on, the same value is displayed above and below the delay time knob (5). C Output port This indicates the type and number of the output port to which the channel is assigned. D Channel select popup button This button lets you select the channel that is assigned to the output port. The name of the currently selected channel is displayed. E Delay time knob This knob sets the delay time of the output port. Press this knob to select it, and use multifunction encoders 1-8 to adjust the settings. The millisecond value is shown above the knob, and the delay time value in the units selected in the DELAY SCALE ﬁeld (2) is shown below the knob. F DELAY button Switches the output port delay on/off. G ø (Phase) button Switches the phase of the signal assigned to the output port between normal phase (black) and reverse phase (orange). H ATT knob Adjusts the amount of attenuation for the signal assigned to the output port. To adjust this value, press the knob in the screen to select it, and operate multifunction encoders 1-8. You can adjust the setting in 0.1 dB steps over a range of -96 to +24 dB. The current value is shown immediately below the knob. I Level meter This meter indicates the level of the signal assigned to the output port. J Output port select tabs These tabs switch the output ports controlled in the popup window in groups of up to eight ports. 3 Use the output port select tabs at the bottom of the popup window to select the output port you want to control. Each tab corresponds to the following output ports. ● OMNI 1-8, 9-16 These control OMNI OUT jacks 1-8 and 9-16 respectively. ● SLOT1 1-8, 9-16 ● SLOT2 1-8, 9-16 ● SLOT3 1-8, 9-16 These control output channels 1-8 and 9-16 of slots 1-3 respectively. ● 2TR OUT Control the L/R channels of the 2TR OUT DIGITAL jack. 4 To assign a channel to an output port, press the channel select popup window for that port. The OUTPUT CH SELECT popup window will appear. The popup window includes the following items. 1 2 9 Input/output patching 1 Channel select tabs These select the type of channel shown in the popup window. Each tab corresponds to the following channels. • OUT CH.......... Shows the output channels (MIX channels 1-16, MATRIX channels 1-8, STEREO L/R channels, and MONO (C) channel). • MONITOR OUT Shows the MONITOR OUT L/R/C channels. • CH 1-32 • CH 33-48 {M7CL-48 only} ........... Shows INPUT channels 1-32 {1- 48} B Channel select button Selects the channel to be assigned to the output port you selected in step 3. HINT • If you selected CH 1-32 or CH 33-48 {M7CL-48 only}, the input channel you selected will be output directly from the corresponding output port. At this time, the channel select button in the OUTPUT PORT popup window is shown as "DIR CH xx" (xx= channel number). (For details on direct output → p. 102). M7CL Owner's Manual 97

Section	Page
Cover	1
PRECAUTIONS	4
Contents	6
1. Introduction	9
Thank you	9
An overview of the M7CL	9
Differences between the M7CL-48 and M7CL-32	11
The M7CL's channel structure	13
About the MIX bus types (VARI / FIXED)	14
About word clock	14
Conventions in this manual	14
About the firmware version	14
2. Panels and controls	15
Top panel	15
Rear panel	22
Under the front pad	24
3. Basic operation of the M7CL	25
Basic operations in the top panel / touch screen	25
Pressing the touch screen	25
Multiple selection (specifying a range)	25
Special operations for keys	25
Encoder operations	25
Multifunction encoder operations	26
The on-screen user interface	26
Tabs	26
Buttons	26
Faders / Knobs	27
List windows	27
Keyboard window	27
Popup windows	28
Dialog boxes	28
Viewing the touch screen	28
Function access area	28
Main area	29
Entering names	30
Using the tool buttons	31
About the tool buttons	31
Using libraries	31
Initializing settings	35
Copying/pasting settings	36
Comparing two settings	36
4. Connections and setup	39
Connections	39
Setting up to use the M7CL	43
Restoring the current scene to the default state	43
Word clock connections and settings	43
Making HA (Head Amp) gain settings	44
Sending an input channel signal to the STEREO bus	47
5. Input channel operations	51
Signal flow for input channels	51
Specifying the channel name and icon	53
Making HA (Head Amp) settings	55
Sending the signal from an input channel to the STEREO/MONO buses	57
Sending the signal from an input channel to a MIX bus	61
Using the SELECTED CHANNEL section	61
Using the Centralogic section	63
Using the faders (SENDS ON FADER mode)	64
Sending the signal from an input channel to the MATRIX buses	66
Using the SELECTED CHANNEL section	66
Using the Centralogic section	67
6. Output channel operations	69
Signal flow for output channels	69
Specifying the channel name and icon	71
Sending signals from MIX channels to the STEREO/MONO bus	72
Sending signals from MIX channels and STEREO/MONO channels to MATRIX buses	75
Using the SELECTED CHANNEL section	75
Using the Centralogic section	76
7. Operations in the SELECTED CHANNEL section	79
About the SELECTED CHANNEL section	79
About the SELECTED CHANNEL VIEW screen	80
Operations in the SELECTED CHANNEL section	81
8. Operations in the Centralogic section	87
About the Centralogic section	87
About the OVERVIEW screen	88
Operations in the Centralogic section	90
Fixing the channels or DCA groups of the Centralogic section	94
9. Input/output patching	95
Changing the output patch settings	95
Changing the input patch settings	98
Inserting an external device into a channel	100
Directly outputting an INPUT channel	102
10. EQ and Dynamics	105
About EQ and dynamics	105
Using EQ	105
Using dynamics	108
Using the EQ or Dynamics libraries	111
EQ library	111
Dynamics library	111
11. Grouping and linking	113
About DCA Groups and Mute Groups	113
Using DCA groups	113
Assigning channels to a DCA group	113
Controlling DCA groups	115
Using mute groups	116
Assigning channels to mute groups	116
Controlling mute groups	117
Using the Mute Safe function	119
The Channel Link function	120
Linking the desired input channels	120
Copying, moving, or initializing a channel	122
Copying the parameters of a channel	122
Moving the parameters of a channel	123
Initializing the parameters of a channel	124
12. Scene memory	125
About scene memories	125
Using scene memories	125
Storing a scene	125
Recalling a scene	128
Using user-defined keys to recall	129
Editing scene memories	130
Sorting and renaming scene memories	130
Scene memory editing	132
Copying/pasting a scene	132
Clearing a scene	133
Cutting a scene	134
Inserting a scene	134
Using the Focus function	135
Using the Recall Safe function	136
Using the Fade function	139
13. Monitor/Cue	141
About the monitor/cue functions	141
Using the Monitor function	142
Using the Cue function	145
About cue groups	145
Operating the Cue function	146
14. Talkback/Oscillator	149
About the talkback and oscillator functions	149
Using talkback	149
Using the oscillator	151
15. Meters	153
Operations in the METER screen	153
Using the MBM7CL meter bridge (option)	155
16. Graphic EQ and effects	157
About the virtual rack	157
Virtual rack operations	158
Graphic EQ operations	161
About the graphic EQ	161
Inserting a GEQ in a channel	161
Using the 31 Band GEQ	163
Using the Flex15GEQ	165
About the internal effects	167
Using an internal effect via send/return	168
Inserting an internal effect into a channel	170
Editing the internal effect parameters	171
Using the Tap Tempo function	173
Using the Freeze effect	175
Using the graphic EQ and effect libraries	176
Using an external head amp	177
External head amp connections	177
Remotely controlling an external head amp	178
17. MIDI	181
MIDI functionality on the M7CL	181
Basic MIDI settings	182
Using program changes to recall scenes and library items	184
Using control changes to control parameters	187
Using parameter changes to control parameters	189
18. User settings (Security)	191
User Level settings	191
User types and user authentication keys	191
Setting the Administrator password	192
Creating a user authentication key	193
Logging-in	193
Changing the password	195
Editing a user authentication key	196
Changing the user level	196
Preferences	198
User-defined keys	200
Console lock	201
Locking the console	201
Unlocking the console	201
Using a USB storage device to save/load data	202
Saving the M7CL's internal data on a USB storage device	202
Loading a file from a USB storage device	203
Editing the files saved on a USB storage device	203
Formatting media on a USB storage device	206
19. Other functions	207
About the SETUP screen	207
Word Clock and Slot settings	208
Using cascade connections	210
Operations on the cascade slave M7CL	210
Operations on the cascade master M7CL	211
Basic settings for MIX buses and MATRIX buses	212
Setting the date and time of the internal clock	213
Setting the network address	214
Specifying the brightness of the touch screen, LEDs, and lamps	215
Initializing the M7CL's internal memory	216
Adjusting the detection point of the touch screen (Calibration function)	217
Adjusting the faders (Calibration function)	218
Adjusting the input/output gain (Calibration function)	219
Appendices	221
EQ Library List	221
DYNAMICS Library List	222
Dynamics Parameters	225
Effect Type List	228
Effects Parameters	229
Effects and tempo synchronization	240
Scene Memory/Effect Library to Program Change Table	241
Parameters that can be assigned to control changes	245
Control change parameter assignments	247
NRPN parameter assignments	249
Mixing parameter operation applicability	252
Functions that can be assigned to user-defined keys	253
MIDI Data Format	255
Warning/Error Messages	262
Troubleshooting	264
General Specifications	265
Input/output characteristics	266
Electrical characteristics	268
Other Functions	269
Pin Assignment	270
Dimensions	271
Installing the MBM7CL meter bridge (option)	272
MIDI Implementation Chart	273
Index	274
Block Diagram	279

Match case Limit results 1 per page

Changing the output patch settings

M7CL

Owner’s Manual

Input/output patching

•

FEET (1127.26ft/s)

...........

The delay time is shown as a dis-

tance in feet, calculated as the

speed of sound (1127.26 feet/s) at

an air temperature of 20

C (68

multiplied by the delay time (sec-

onds).

• SAMPLE

.........

The delay time is shown as a num-

ber of samples. If you change the

sampling frequency at which the

M7CL operates, the number of sam-

ples will change accordingly.

• msec

...........

The delay time is shown in units of

milliseconds. If this button is on, the

same value is displayed above and

below the delay time knob (

Output port

This indicates the type and number of the output port

to which the channel is assigned.

Channel select popup button

This button lets you select the channel that is assigned

to the output port. The name of the currently selected

channel is displayed.

Delay time knob

This knob sets the delay time of the output port. Press

this knob to select it, and use multifunction encoders

1–8 to adjust the settings. The millisecond value is

shown above the knob, and the delay time value in the

units selected in the DELAY SCALE ﬁeld (

) is

shown below the knob.

DELAY button

Switches the output port delay on/off.

ø (Phase) button

Switches the phase of the signal assigned to the output

port between normal phase (black) and reverse phase

(orange).

ATT knob

Adjusts the amount of attenuation for the signal

assigned to the output port. To adjust this value, press

the knob in the screen to select it, and operate multi-

function encoders 1–8. You can adjust the setting in

0.1 dB steps over a range of -96 to +24 dB. The cur-

rent value is shown immediately below the knob.

Level meter

This meter indicates the level of the signal assigned to

the output port.

Output port select tabs

These tabs switch the output ports controlled in the

popup window in groups of up to eight ports.

Use the output port select tabs at the bot-

tom of the popup window to select the out-

put port you want to control.

Each tab corresponds to the following output ports.

●

OMNI 1–8, 9–16

These control OMNI OUT jacks 1–8 and 9–16

respectively.

●

SLOT1 1–8, 9–16

●

SLOT2 1–8, 9–16

●

SLOT3 1–8, 9–16

These control output channels 1–8 and 9–16 of slots

1–3 respectively.

●

2TR OUT

Control the L/R channels of the 2TR OUT DIGI-

TAL jack.

To assign a channel to an output port,

press the channel select popup window for

that port.

The OUTPUT CH SELECT popup window will

appear. The popup window includes the following

items.

Channel select tabs

These select the type of channel shown in the popup

window. Each tab corresponds to the following

channels.

•

OUT CH

..........

Shows the output channels (MIX

channels 1–16, MATRIX channels

1–8, STEREO L/R channels, and

MONO (C) channel).

•

MONITOR OUT

...........

Shows the MONITOR OUT L/R/C

channels.

•

CH 1–32

•

CH 33–48 {M7CL–48 only}

...........

Shows INPUT channels 1–32 {1–

48}

Channel select button

Selects the channel to be assigned to the output port

you selected in step 3.

•

If you selected CH 1–32 or CH 33–48 {M7CL–48 only}, the

input channel you selected will be output directly from the cor-

responding output port. At this time, the channel select button

in the OUTPUT PORT popup window is shown as “DIR CH

xx” (xx= channel number). (For details on direct output

→

p. 102).

HINT