Yamaha M7CL M7cl V1 Owner's Manual - Page 101
DIRECT OUT popup button, and press one, of the two INSERT fields.
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Inserting an external device into a channel 4 Access either the one-channel or the eightchannel INSERT/DIRECT OUT popup window, and press the INSERT OUT popup button. The OUTPUT PORT SELECT popup window will appear, allowing you to select the output port used for insert-out. The window includes the following items. 1 2 1 Output port select tabs These tabs select the output ports shown in the window. Each tab corresponds to the following output ports. • SLOT 1-SLOT 3 ...........Output channels 1-16 from slots 1- 3 will be displayed. • RACK ...........Input ports to rack 1-8 will be displayed. B Output port select buttons These buttons assign the output port that will be used as insert-out for the currently selected channel. NOTE • If a rack in which a GEQ is mounted is specified as the insertout or insert-in, the other patch point will automatically be assigned to the same rack. Additionally, if you defeat the insert-out or insert-in of a rack in which a GEQ is mounted, the other patch point will automatically be defeated. 5 Use the output port select tabs and the output port select buttons to specify the output port that will be used as insert-out, and press the CLOSE button. You will return to the INSERT/DIRECT OUT popup window. 6 Press the INSERT IN popup button. The INPUT PORT SELECT popup window will appear, allowing you to select the input port used for insert-in. 7 Specify the input port you will use for insert-in, and press the CLOSE button. 8 Press the INSERT ON/OFF button to turn it ON. In this state, insert-out/in is enabled. Adjust the input/ output levels of your external device as necessary. HINT • Even if the INSERT ON/OFF button is OFF, the signal selected for insert-out will continue to be sent. 9 If you want to change the insert-out/in position, access the one-channel INSERT/ DIRECT OUT popup button, and press one of the two INSERT fields. The INSERT field you pressed will be enabled, and the other INSERT field will be disabled. 9 10 When you have finished making all settings, click the "×" symbol located in the upper right to close the window. You will return to the OVERVIEW screen. 11 As desired, make insert settings for other channels as well. Input/output patching M7CL Owner's Manual 101