Yamaha M7CL M7cl V1 Owner's Manual - Page 126

Using scene memories 1 23 5 4 1 SCENE field This field always displays general information about the scene. You can press this field to access the SCENE LIST window, where you can view and edit more detailed settings for the scene. B Scene number This indicates the number of the currently selected scene. C R symbol (READ ONLY symbol) / Protect symbol Read-only scenes are indicated by an R symbol (Readonly symbol) displayed here. Write-protected scenes are indicated by a Protect symbol. D Scene title This displays the title of the currently selected scene. E E symbol (EDIT symbol) This symbol will appear when you edit the mix parameters of the currently-loaded scene. This symbol indicates that you must execute the Store operation if you want to keep the changes you made. HINT • If you hold down either of the SCENE MEMORY keys, the scene number will change consecutively. • If you press the SCENE MEMORY keys simultaneously, the SCENE field indication will return to the number of the currently-loaded scene. NOTE • You cannot Store to a scene number for which the Protect symbol or R symbol is displayed. 3 Press the SCENE MEMORY [STORE] key. The SCENE STORE popup window will appear, allowing you to assign a title or comment to the scene. 1 2 B COMMENT field Press this field to select it, and enter a comment for the scene. You can use this as a memorandum for each scene (maximum 32 characters). HINT • The title and comment can be edited later (→ p. 130). 4 Assign a title or comment to the scene as desired. For details on entering text, refer to "Entering names" (→ p. 30). 5 Press the SCENE MEMORY [STORE] key or the STORE button located in the lower part of the SCENE STORE popup window. The SCENE STORE popup window will close, and a dialog box will ask you to confirm the Store operation. 6 To execute the Store operation, press the OK button. The current mix settings will be stored to the scene number you selected in step 2. When storing is completed, the scene number in the function access area will stop blinking. If you decide to cancel the Store operation, press the CANCEL button instead of the OK button. HINT • You have the option of making settings so that the Store Confirmation dialog box does not appear (→ p. 198). In this case, pressing the SCENE MEMORY [STORE] key once will display the SCENE STORE popup window as usual, and pressing it once again will execute the Store operation. Alternatively, you can rapidly press the SCENE MEMORY [STORE] key twice to store without seeing the SCENE STORE popup window. NOTE • If you store to a scene number in which a scene is already stored, the previous data will be overwritten. It is possible to cancel a scene store operation immediately after overwriting a scene (→ p. 128). 1 SCENE TITLE field Press this field to select it, and enter a title for the scene (maximum 16 characters). 126 M7CL Owner's Manual