Yamaha M7CL M7cl V1 Owner's Manual - Page 154
Fader, Fader level, point select button to switch the metering
![]() |
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Operations in the METER screen In the METER screen you can view the following information for each channel. 1 2 3 1 Level meter This is a realtime indication of the input (or output) level of the corresponding channel. The ∑ segment will light if any of the level detection points in each channel reach the OVER level. The ∑ segment level detection points are as follows. • Input channels ...........PRE HPF, PRE FADER, POST ON • Output channels ...........PRE EQ, PRE FADER, POST ON HINT • If ∑ is lit, you can switch the metering point to determine the point at which the overload is occurring. B Fader This is a realtime indication of the top panel fader position for the corresponding channel. The fader in the screen cannot be operated. C Fader level This indicates the current fader value in a range of - ∞ to 10. 2 If necessary, you can press a metering point select button to switch the metering point. The metering point for the level meter can be specified independently for input channels and output channels. You can choose the following metering points. ● Input channels • PRE HPF........ Immediately before the high-pass filter • PRE FADER ... Immediately before the fader • POST ON ....... Immediately after the [ON] key ● Output channels • PRE EQ.......... Immediately before the attenuator • PRE FADER ... Immediately before the fader • POST ON ....... Immediately after the [ON] key HINT • The metering point for output channels will also affect the optional meter bridge (MBM7CL). 3 If you want the peak levels of the level meter to be held, press the PEAK HOLD button to turn it on. PEAK HOLD button on/off operations will affect both input channels and output channels as well as the MBM7CL meter bridge. When you turn this button off, the peak level indication that had been held will be cleared. HINT • You can also assign the PEAK HOLD button on/off function to a user-defined key (→ p. 200). 154 M7CL Owner's Manual
![](/manual_guide/products/yamaha-m7cl-m7cl-v1-owners-manual-022fa08/154.png)